6 open source boards using the XL4015E1

Real designs built with the XL4015E1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The XL4015E1 in open source designs

The gallery holds 6 open source boards using the XL4015E1 from 3 GitHub repositories; a typical one measures about 105.7 × 82.8 mm and carries around 63 components.

100% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.

The most starred is Mothbox 5.0.6 by Digital-Naturalism-Laboratories.

Parts used alongside the XL4015E1

Microcontrollers on boards using the XL4015E1

What boards using the XL4015E1 are built for

XL4015E1: common questions

Where can I find a XL4015E1 reference design?

Each of the 6 boards on this page is a real design using the XL4015E1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the XL4015E1 use?

Most are built on Raspberry Pi (2), ESP32 (1) and STM32 (1).

How big is a typical board using the XL4015E1?

The median is 105.7 × 82.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the XL4015E1?

By GitHub stars, Mothbox 5.0.6 by Digital-Naturalism-Laboratories, with 2 stars.

Can I simulate one of these boards using the XL4015E1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part