2 open source boards using the XL6019E1

Real designs built with the XL6019E1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The XL6019E1 in open source designs

The gallery holds 2 open source boards using the XL6019E1 from 2 GitHub repositories; a typical one measures about 68.5 × 65.6 mm and carries around 64 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Digits by justinlindh.

Parts used alongside the XL6019E1

Microcontrollers on boards using the XL6019E1

What boards using the XL6019E1 are built for

XL6019E1: common questions

Where can I find a XL6019E1 reference design?

Each of the 2 boards on this page is a real design using the XL6019E1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the XL6019E1 use?

Most are built on ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the XL6019E1?

The median is 68.5 × 65.6 mm, and 100% are two-layer designs.

What is the most popular open source board using the XL6019E1?

By GitHub stars, Digits by justinlindh, with 4 stars.

Can I simulate one of these boards using the XL6019E1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part