9 open source boards using the YAAJ_BluePill_Part_Like

Real designs built with the YAAJ_BluePill_Part_Like, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the YAAJ_BluePill_Part_Like

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the YAAJ_BluePill_Part_Like connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin is left unconnected on 6 of 6 designs.
  • The RST pin is left unconnected on 6 of 6 designs.
  • The PA11 pin is left unconnected on 5 of 6 designs.
  • The PA12 pin is left unconnected on 5 of 6 designs.
PB12pin 1Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 4.7 kΩ (1)
PB13pin 2Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 4.7 kΩ (1)
PB14pin 3Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 4.7 kΩ (1)
PB15pin 4Connected to: Not connected 67% · a signal 33%
PA11pin 8Connected to: Not connected 83% · a signal 17%
PA12pin 9Connected to: Not connected 83% · a signal 17%
PA15pin 10Connected to: Not connected 67% · a signal 33%
5Vpin 18Connected to: 5V 67% · not connected 17% · a signal 17%
GNDpin 19, 39, 40Connected to: GND 72% · not connected 17%
VBATpin 21Connected to: Not connected 100%
PC13pin 22Connected to: Not connected 67% · a signal 33%
PC14pin 23Connected to: Not connected 67% · a signal 33%
PC15pin 24Connected to: Not connected 67% · a signal 33%
PA0pin 25Connected to: Not connected 67% · a signal 33%
PB1pin 34Connected to: Not connected 67% · a signal 33%
RSTpin 37Connected to: Not connected 100%

21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Blue Pill Kickstart Switcher by solarmon, BluePill-Monster-Arcade-Board withbuttons by steelpuxnastik, Bs base by MelexinVN and SplitKbHub by semicontinuity.

The YAAJ_BluePill_Part_Like in open source designs

The gallery holds 9 open source boards using the YAAJ_BluePill_Part_Like from 7 GitHub repositories; a typical one measures about 95.4 × 78.4 mm and carries around 24 components.

100% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.

The most starred is Blue Pill Kickstart Switcher by solarmon.

Parts used alongside the YAAJ_BluePill_Part_Like

What boards using the YAAJ_BluePill_Part_Like are built for

YAAJ_BluePill_Part_Like: common questions

Where can I find a YAAJ_BluePill_Part_Like reference design?

Each of the 9 boards on this page is a real design using the YAAJ_BluePill_Part_Like. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the YAAJ_BluePill_Part_Like VBAT pin connected?

The VBAT pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the YAAJ_BluePill_Part_Like.

How is the YAAJ_BluePill_Part_Like RST pin connected?

The RST pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the YAAJ_BluePill_Part_Like.

How is the YAAJ_BluePill_Part_Like PA11 pin connected?

The PA11 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the YAAJ_BluePill_Part_Like.

How big is a typical board using the YAAJ_BluePill_Part_Like?

The median is 95.4 × 78.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the YAAJ_BluePill_Part_Like?

By GitHub stars, Blue Pill Kickstart Switcher by solarmon, with 17 stars.

Can I simulate one of these boards using the YAAJ_BluePill_Part_Like before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part