2 open source boards using the 74HC253

Real designs built with the 74HC253, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The 74HC253 in open source designs

The gallery holds 2 open source boards using the 74HC253 from 2 GitHub repositories; a typical one measures about 220 × 132.3 mm and carries around 126 components.

50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is K30 SBC by transistorfet.

Parts used alongside the 74HC253

Microcontrollers on boards using the 74HC253

AVR/Arduino 1

What boards using the 74HC253 are built for

74HC253: common questions

Where can I find a 74HC253 reference design?

Each of the 2 boards on this page is a real design using the 74HC253. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 74HC253 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 74HC253?

The median is 220 × 132.3 mm, and 50% are two-layer designs.

What is the most popular open source board using the 74HC253?

By GitHub stars, K30 SBC by transistorfet, with 69 stars.

Can I simulate one of these boards using the 74HC253 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.