4 open source boards using the 74LS92
Real designs built with the 74LS92, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 84 parts
Nanocomp6809
breadboardinglabs
84 partsApache-2.024 
RetroZ SBC for S80
formix
127 × 73.7 mm48 parts2LApache-2.022
TurboXT Addon
hkzlab
74.3 × 43.8 mm28 parts2LCC-BY-NC-4.015
AVR/ArduinoSbc 8088
miselin
243.8 × 243.8 mm206 parts4LCERN-OHL-P-2.02
The 74LS92 in open source designs
The gallery holds 4 open source boards using the 74LS92 from 4 GitHub repositories; a typical one measures about 127 × 73.7 mm and carries around 66 components.
67% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Nanocomp6809 by breadboardinglabs.
Microcontrollers on boards using the 74LS92
What boards using the 74LS92 are built for
74LS92: common questions
Where can I find a 74LS92 reference design?
Each of the 4 boards on this page is a real design using the 74LS92. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 74LS92 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74LS92?
The median is 127 × 73.7 mm, and 67% are two-layer designs.
What is the most popular open source board using the 74LS92?
By GitHub stars, Nanocomp6809 by breadboardinglabs, with 24 stars.
Can I simulate one of these boards using the 74LS92 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.