5 open source boards using the 74LS92
Real designs built with the 74LS92, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 84 parts
Nanocomp6809
breadboardinglabs
84 partsApache-2.024 RetroZ SBC for S80
formix
127 × 73.7 mm48 parts2LApache-2.022TurboXT Addon
hkzlab
74.3 × 43.8 mm28 parts2LCC-BY-NC-4.015AVR/Arduino
Sbc 8088
miselin
243.8 × 243.8 mm206 parts4LCERN-OHL-P-2.02- schematic only · 164 parts
Xl-7-repro
computerguy096
164 partsGPL-3.00
The 74LS92 in open source designs
The gallery holds 5 open source boards using the 74LS92 from 5 GitHub repositories; a typical one measures about 127 × 73.7 mm and carries around 84 components.
67% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Nanocomp6809 by breadboardinglabs.
Parts used alongside the 74LS92
Microcontrollers on boards using the 74LS92
What boards using the 74LS92 are built for
74LS92: common questions
Where can I find a 74LS92 reference design?
Each of the 5 boards on this page is a real design using the 74LS92. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 74LS92?
The 74LS00, 74LS02, 74LS138, 74LS175 and 74LS244 appear in the most repositories here.
Which microcontrollers do boards using the 74LS92 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74LS92?
The median is 127 × 73.7 mm, and 67% are two-layer designs.
What is the most popular open source board using the 74LS92?
By GitHub stars, Nanocomp6809 by breadboardinglabs, with 24 stars.
Can I simulate one of these boards using the 74LS92 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.