5 open source boards using the 74LVC4245A
Real designs built with the 74LVC4245A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32NV-Meter rev b
curtisseizert
150 × 100 mm489 parts6LNo license42
64MB-SIMM
herzmx
108 × 25.3 mm34 parts4LCC-BY-NC-4.012
Tesla-Coil-MIDI-Synth
ucsbieee
132.1 × 61 mm94 parts4LNo license4
Bx hub75
shinyblink
69.9 × 63.5 mm28 parts2LISC1
128MB-SIMM
108 × 25.3 mm29 parts4LCC-BY-NC-4.012
The 74LVC4245A in open source designs
The gallery holds 5 open source boards using the 74LVC4245A from 4 GitHub repositories; a typical one measures about 108 × 61 mm and carries around 34 components.
80% use four copper layers or more, and 20% carry an open source license.
The most starred is NV-Meter rev b by curtisseizert.
Microcontrollers on boards using the 74LVC4245A
What boards using the 74LVC4245A are built for
74LVC4245A: common questions
Where can I find a 74LVC4245A reference design?
Each of the 5 boards on this page is a real design using the 74LVC4245A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 74LVC4245A use?
Most are built on STM32 (1).
How big is a typical board using the 74LVC4245A?
The median is 108 × 61 mm, and 20% are two-layer designs.
What is the most popular open source board using the 74LVC4245A?
By GitHub stars, NV-Meter rev b by curtisseizert, with 42 stars.
Can I simulate one of these boards using the 74LVC4245A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.