7 open source boards using the 74LVC4245A
Real designs built with the 74LVC4245A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
NV-Meter rev b
curtisseizert
150 × 100 mm489 parts6LNo license4264MB-SIMM
herzmx
108 × 25.3 mm34 parts4LCC-BY-NC-4.012Tesla-Coil-MIDI-Synth
ucsbieee
132.1 × 61 mm94 parts4LNo license4Bx hub75
shinyblink
69.9 × 63.5 mm28 parts2LISC1STM32
Quokka
ChrisPVille
228.6 × 184.2 mm331 parts4LApache-2.00Microchip SAM
Motherboard
MuddJTS
141.5 × 53.8 mm134 parts4LNo license0128MB-SIMM
herzmx
108 × 25.3 mm29 parts4LCC-BY-NC-4.012
How designs wire the 74LVC4245A
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVC4245A connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 47 µF).
- The VCCB pins have a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 1 µF).
- The OE pin is tied to GND on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 5V 83% · a signal 17% |
|
| GNDpin 11, 12, 13 | Connected to: GND 83% · a signal 17% | — |
| B6pin 15 | Connected to: Signal 100% |
|
| B5pin 16 | Connected to: Signal 100% |
|
| B4pin 17 | Connected to: Signal 100% |
|
| B2pin 19 | Connected to: Signal 100% |
|
| B1pin 20 | Connected to: Signal 100% |
|
| B0pin 21 | Connected to: Signal 100% |
|
| OEpin 22 | Connected to: GND 67% · a signal 33% | — |
| VCCBpin 23, 24 | Connected to: 1.8V 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NV-Meter rev b by curtisseizert, 128MB-SIMM by herzmx, Tesla-Coil-MIDI-Synth by ucsbieee and Bx hub75 by shinyblink.
The 74LVC4245A in open source designs
The gallery holds 7 open source boards using the 74LVC4245A from 6 GitHub repositories; a typical one measures about 132.1 × 61 mm and carries around 94 components.
86% use four copper layers or more, and 29% carry an open source license.
The most starred is NV-Meter rev b by curtisseizert.
Microcontrollers on boards using the 74LVC4245A
What boards using the 74LVC4245A are built for
74LVC4245A: common questions
Where can I find a 74LVC4245A reference design?
Each of the 7 boards on this page is a real design using the 74LVC4245A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC4245A VCCA pin?
The VCCA pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 6 open source designs using the 74LVC4245A.
What decoupling capacitors do designs use on the 74LVC4245A VCCB pin?
The VCCB pins have a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the 74LVC4245A.
How is the 74LVC4245A OE pin connected?
The OE pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74LVC4245A.
Which microcontrollers do boards using the 74LVC4245A use?
Most are built on STM32 (2) and Microchip SAM (1).
How big is a typical board using the 74LVC4245A?
The median is 132.1 × 61 mm, and 14% are two-layer designs.
What is the most popular open source board using the 74LVC4245A?
By GitHub stars, NV-Meter rev b by curtisseizert, with 42 stars.
Can I simulate one of these boards using the 74LVC4245A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.