6 open source boards using the ADF4351
Real designs built with the ADF4351, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Uncut Gem
QuantumVillage
82.1 × 82.1 mm110 parts2LAGPL-3.0197
AVR/ArduinoWavelab-24G-Addon module
PA0MHE
118.5 × 94.5 mm187 parts2LMIT5
Spectrum analyser-Front-End
richardhosking
195 × 60 mm144 parts2LNo license2
STM32Mini-Spectrum-Analyzer-
Dhruv2212-star
50 × 70 mm61 parts4LNo license0
ESP32Uncut Gem bkup
82.1 × 82.1 mm78 parts2LAGPL-3.0197
ESP32DiamondGeezer
101 × 97.4 mm32 parts2LAGPL-3.0197
The ADF4351 in open source designs
The gallery holds 6 open source boards using the ADF4351 from 4 GitHub repositories; a typical one measures about 91.6 × 82.1 mm and carries around 94 components.
83% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Uncut Gem by QuantumVillage.
Microcontrollers on boards using the ADF4351
What boards using the ADF4351 are built for
ADF4351: common questions
Where can I find a ADF4351 reference design?
Each of the 6 boards on this page is a real design using the ADF4351. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ADF4351 use?
Most are built on ESP32 (3), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the ADF4351?
The median is 91.6 × 82.1 mm, and 83% are two-layer designs.
What is the most popular open source board using the ADF4351?
By GitHub stars, Uncut Gem by QuantumVillage, with 197 stars.
Can I simulate one of these boards using the ADF4351 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.