3 open source boards using the AP2112-3.3V
Real designs built with the AP2112-3.3V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Wiimote ir sensor
eatnooM
13.5 × 16.3 mm10 parts2LCC-BY-SA-4.019
Wiimote ir sensor inline
13 × 22.5 mm10 parts2LCC-BY-SA-4.019
Wiimote ir sensor inline panel-2-vert
13 × 45 mm10 parts2LCC-BY-SA-4.019
The AP2112-3.3V in open source designs
The gallery holds 3 open source boards using the AP2112-3.3V from 1 GitHub repository; a typical one measures about 13 × 22.5 mm and carries around 10 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Wiimote ir sensor inline by eatnooM.
What boards using the AP2112-3.3V are built for
AP2112-3.3V: common questions
Where can I find a AP2112-3.3V reference design?
Each of the 3 boards on this page is a real design using the AP2112-3.3V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the AP2112-3.3V?
The median is 13 × 22.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the AP2112-3.3V?
By GitHub stars, Wiimote ir sensor inline by eatnooM, with 19 stars.
Can I simulate one of these boards using the AP2112-3.3V before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.