4 open source boards using the AP2205
Real designs built with the AP2205, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Focus bar panel v1
StuckAtPrototype
120 × 95 mm66 parts2LApache-2.036
ESP32PCB Coaster
90 × 90 mm70 parts2LNo license31
ESP32GlowPad
108 × 70 mm40 parts2LApache-2.013
ESP32FocusBeam
120 × 25 mm66 parts2LApache-2.036
The AP2205 in open source designs
The gallery holds 4 open source boards using the AP2205 from 3 GitHub repositories; a typical one measures about 114 × 80 mm and carries around 66 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is FocusBeam by StuckAtPrototype.
Parts used alongside the AP2205
Microcontrollers on boards using the AP2205
What boards using the AP2205 are built for
AP2205: common questions
Where can I find a AP2205 reference design?
Each of the 4 boards on this page is a real design using the AP2205. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP2205 use?
Most are built on ESP32 (4).
How big is a typical board using the AP2205?
The median is 114 × 80 mm, and 100% are two-layer designs.
What is the most popular open source board using the AP2205?
By GitHub stars, FocusBeam by StuckAtPrototype, with 36 stars.
Can I simulate one of these boards using the AP2205 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.