3 open source boards using the AP22811
Real designs built with the AP22811, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sbc allwinner a13
vd-rd
80 × 42 mm163 parts4LNo license38
Sbc allwinner v3s
66 × 42 mm155 parts4LNo license22
ESP32Sbc allwinner F1C200s
60 × 44 mm105 parts4LNo license7
The AP22811 in open source designs
The gallery holds 3 open source boards using the AP22811 from 3 GitHub repositories; a typical one measures about 66 × 42 mm and carries around 155 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Sbc allwinner a13 by vd-rd.
Parts used alongside the AP22811
Microcontrollers on boards using the AP22811
What boards using the AP22811 are built for
AP22811: common questions
Where can I find a AP22811 reference design?
Each of the 3 boards on this page is a real design using the AP22811. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AP22811?
The MCP1640CH, USBLC6-2P6, AP61100, AXP209 and PCA6408A appear in the most repositories here.
Which microcontrollers do boards using the AP22811 use?
Most are built on ESP32 (1).
How big is a typical board using the AP22811?
The median is 66 × 42 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP22811?
By GitHub stars, Sbc allwinner a13 by vd-rd, with 38 stars.
Can I simulate one of these boards using the AP22811 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.