4 open source boards using the ATGM336H-5N31
Real designs built with the ATGM336H-5N31, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoPtFlex
custom-ds
50.1 × 88.2 mm76 parts2LGPL-3.03
ESP32Bramble
justinlindh
96 × 50 mm84 parts2LMIT2
ESP32ESP32 LORA Chat
jharvey
121.9 × 101.6 mm222 parts4LGPL-3.01
Nordic nRFWtrack
supisbe12
85.8 × 53.4 mm34 parts2LNo license0
The ATGM336H-5N31 in open source designs
The gallery holds 4 open source boards using the ATGM336H-5N31 from 4 GitHub repositories; a typical one measures about 90.9 × 70.8 mm and carries around 80 components.
75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is PtFlex by custom-ds.
Parts used alongside the ATGM336H-5N31
Microcontrollers on boards using the ATGM336H-5N31
What boards using the ATGM336H-5N31 are built for
ATGM336H-5N31: common questions
Where can I find a ATGM336H-5N31 reference design?
Each of the 4 boards on this page is a real design using the ATGM336H-5N31. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATGM336H-5N31 use?
Most are built on ESP32 (2), AVR/Arduino (1) and Nordic nRF (1).
How big is a typical board using the ATGM336H-5N31?
The median is 90.9 × 70.8 mm, and 75% are two-layer designs.
What is the most popular open source board using the ATGM336H-5N31?
By GitHub stars, PtFlex by custom-ds, with 3 stars.
Can I simulate one of these boards using the ATGM336H-5N31 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.