4 open source boards using the ATTINY1616-MNR
Real designs built with the ATTINY1616-MNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoSplitFlapDriverATtiny1616V4.kicad
adamgmakes
30 × 60 mm25 parts2LNo license182
AVR/ArduinoSH-RPi hardware
hatlabs
65 × 56.5 mm153 parts4LCC-BY-4.056
AVR/ArduinoScampi
mackieks
20 × 20 mm55 parts2LSHL-2.112
AVR/ArduinoPyroPen
DerpyDoggo11
43 × 10 mm55 parts2LNo license1
The ATTINY1616-MNR in open source designs
The gallery holds 4 open source boards using the ATTINY1616-MNR from 4 GitHub repositories; a typical one measures about 36.5 × 38.3 mm and carries around 55 components.
75% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is SplitFlapDriverATtiny1616V4.kicad pcb by adamgmakes.
Microcontrollers on boards using the ATTINY1616-MNR
What boards using the ATTINY1616-MNR are built for
ATTINY1616-MNR: common questions
Where can I find a ATTINY1616-MNR reference design?
Each of the 4 boards on this page is a real design using the ATTINY1616-MNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATTINY1616-MNR use?
Most are built on AVR/Arduino (4).
How big is a typical board using the ATTINY1616-MNR?
The median is 36.5 × 38.3 mm, and 75% are two-layer designs.
What is the most popular open source board using the ATTINY1616-MNR?
By GitHub stars, SplitFlapDriverATtiny1616V4.kicad pcb by adamgmakes, with 182 stars.
Can I simulate one of these boards using the ATTINY1616-MNR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.