4 open source boards using the BQ32000
Real designs built with the BQ32000, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RoboCape
PREDICT-EPFL
86.4 × 54.6 mm113 partsNo license4
AVR/ArduinoCurry2
etf-lth
82 × 50.1 mm167 partsNo license2
AVR/ArduinoBADGEr
wyolum
101.6 × 78.7 mm114 parts2LNo license2
AVR/ArduinoOHSBadge
101.6 × 78.7 mm116 parts2LNo license1
The BQ32000 in open source designs
The gallery holds 4 open source boards using the BQ32000 from 4 GitHub repositories; a typical one measures about 94 × 66.7 mm and carries around 115 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is RoboCape by PREDICT-EPFL.
Parts used alongside the BQ32000
Microcontrollers on boards using the BQ32000
What boards using the BQ32000 are built for
BQ32000: common questions
Where can I find a BQ32000 reference design?
Each of the 4 boards on this page is a real design using the BQ32000. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the BQ32000?
The MCP1700T-33, MCP1702T-50 and TXS0108 appear in the most repositories here.
Which microcontrollers do boards using the BQ32000 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the BQ32000?
The median is 94 × 66.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the BQ32000?
By GitHub stars, RoboCape by PREDICT-EPFL, with 4 stars.
Can I simulate one of these boards using the BQ32000 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.