7 open source boards using the TXS0108
Real designs built with the TXS0108, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAIcezum
FPGAwars
68.6 × 53.3 mm208 parts4LGPL-3.0356
AVR/ArduinoBADGEr
wyolum
101.6 × 78.7 mm114 parts2LNo license2
STM32Blackmagic pikim clone
sergiomd4
41 × 17 mm39 parts2LCC0-1.01
STM32Blackmagic richardeoin clone
40.2 × 16.2 mm35 parts2LCC0-1.01
AVR/ArduinoOHSBadge
101.6 × 78.7 mm116 parts2LNo license1
AVR/ArduinoRepaper
3.8 × 27.9 mm97 parts2LNo license1
AVR/ArduinoALaMode v3
85.1 × 55.9 mm76 partsNo license1
The TXS0108 in open source designs
The gallery holds 7 open source boards using the TXS0108 from 5 GitHub repositories; a typical one measures about 68.6 × 53.3 mm and carries around 97 components.
83% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Icezum by FPGAwars.
Parts used alongside the TXS0108
Microcontrollers on boards using the TXS0108
What boards using the TXS0108 are built for
TXS0108: common questions
Where can I find a TXS0108 reference design?
Each of the 7 boards on this page is a real design using the TXS0108. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TXS0108?
The BQ32000, MCP1700T-33, MCP1702T-50, STM32F_48PIN and TLV70033DCK appear in the most repositories here.
Which microcontrollers do boards using the TXS0108 use?
Most are built on AVR/Arduino (4), STM32 (2) and FPGA (1).
How big is a typical board using the TXS0108?
The median is 68.6 × 53.3 mm, and 83% are two-layer designs.
What is the most popular open source board using the TXS0108?
By GitHub stars, Icezum by FPGAwars, with 356 stars.
Can I simulate one of these boards using the TXS0108 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.