3 open source boards using the C26537
Real designs built with the C26537, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350MAVLink-Lights-Hardware
DanielAdelodun
40 × 40 mm79 parts4LNo license0
RP2040/RP2350MountPico
AaradhyaBarnwal
26.6 × 51 mm36 parts2LNo license0
RP2040/RP2350RP2040 Minimal Design Example
rompasaurus
52 × 51 mm30 parts2LNo license2
The C26537 in open source designs
The gallery holds 3 open source boards using the C26537 from 3 GitHub repositories; a typical one measures about 40 × 51 mm and carries around 36 components.
67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is RP2040 Minimal Design Example by rompasaurus.
Microcontrollers on boards using the C26537
What boards using the C26537 are built for
C26537: common questions
Where can I find a C26537 reference design?
Each of the 3 boards on this page is a real design using the C26537. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C26537 use?
Most are built on RP2040/RP2350 (3).
How big is a typical board using the C26537?
The median is 40 × 51 mm, and 67% are two-layer designs.
What is the most popular open source board using the C26537?
By GitHub stars, RP2040 Minimal Design Example by rompasaurus, with 2 stars.
Can I simulate one of these boards using the C26537 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.