3 open source boards using the CYPD3177-24LQXQ
Real designs built with the CYPD3177-24LQXQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Main
LEDs-by-glowingkitty
58.5 × 120.9 mm117 parts4LGPL-3.05
RP2040/RP2350Sirith pico
winedarksea
158.3 × 50 mm272 parts4LCERN-OHL-W-2.02
ESP32SCAN
jjsprandel
153.3 × 53 mm181 parts6LCC-BY-NC-4.01
The CYPD3177-24LQXQ in open source designs
The gallery holds 3 open source boards using the CYPD3177-24LQXQ from 3 GitHub repositories; a typical one measures about 153.3 × 53 mm and carries around 181 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is MainPCB by LEDs-by-glowingkitty.
Microcontrollers on boards using the CYPD3177-24LQXQ
What boards using the CYPD3177-24LQXQ are built for
CYPD3177-24LQXQ: common questions
Where can I find a CYPD3177-24LQXQ reference design?
Each of the 3 boards on this page is a real design using the CYPD3177-24LQXQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CYPD3177-24LQXQ use?
Most are built on ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the CYPD3177-24LQXQ?
The median is 153.3 × 53 mm, and 0% are two-layer designs.
What is the most popular open source board using the CYPD3177-24LQXQ?
By GitHub stars, MainPCB by LEDs-by-glowingkitty, with 5 stars.
Can I simulate one of these boards using the CYPD3177-24LQXQ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.