6 open source boards using the DRV8870DDA
Real designs built with the DRV8870DDA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Kinisi motor controller board
szolotykh
75 × 60 mm72 parts4LMIT1
ESP32Rev0
Hasatio
67.3 × 96.9 mm125 parts2LNo license0
Lesonar2 tx hardware
tornyol
47.9 × 92.3 mm58 parts2LAGPL-3.0108
ESP32RC14
AgOpenGPS-Official
145 × 108 mm88 parts2LGPL-3.020
ESP32Rev1
67.3 × 96.9 mm108 parts2LNo license0
ESP32SMD
69.2 × 55.6 mm92 parts2LNo license0
The DRV8870DDA in open source designs
The gallery holds 6 open source boards using the DRV8870DDA from 4 GitHub repositories; a typical one measures about 68.2 × 94.6 mm and carries around 90 components.
83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Lesonar2 tx hardware by tornyol.
Parts used alongside the DRV8870DDA
What boards using the DRV8870DDA are built for
DRV8870DDA: common questions
Where can I find a DRV8870DDA reference design?
Each of the 6 boards on this page is a real design using the DRV8870DDA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DRV8870DDA use?
Most are built on ESP32 (4) and STM32 (1).
How big is a typical board using the DRV8870DDA?
The median is 68.2 × 94.6 mm, and 83% are two-layer designs.
What is the most popular open source board using the DRV8870DDA?
By GitHub stars, Lesonar2 tx hardware by tornyol, with 108 stars.
Can I simulate one of these boards using the DRV8870DDA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.