6 open source boards using the ESP32-D0WD-V3
Real designs built with the ESP32-D0WD-V3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Iot esp eth com
uysan
29.5 × 64.5 mm146 parts4LCERN-OHL-P-2.019
ESP32ESP32-D0WD-V3-ControlStand-V0-0
RobertPHeller
34.5 × 23.1 mm166 parts2LGPL-3.03
ESP32Iot esp eth ind
29.5 × 64.5 mm146 parts4LCERN-OHL-P-2.019
RP2040/RP2350Frank next proto
rh1tech
80.6 × 54 mm204 parts4LGPL-3.03
ESP32ESP32-D0WD-V3-MultiFunction
104.1 × 127 mm137 parts2LCC-BY-4.03
RP2040/RP2350Frank air
85.6 × 54 mm176 parts4LGPL-3.03
The ESP32-D0WD-V3 in open source designs
The gallery holds 6 open source boards using the ESP32-D0WD-V3 from 4 GitHub repositories; a typical one measures about 57.5 × 59.2 mm and carries around 156 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is Iot esp eth com by uysan.
Parts used alongside the ESP32-D0WD-V3
Microcontrollers on boards using the ESP32-D0WD-V3
What boards using the ESP32-D0WD-V3 are built for
ESP32-D0WD-V3: common questions
Where can I find a ESP32-D0WD-V3 reference design?
Each of the 6 boards on this page is a real design using the ESP32-D0WD-V3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESP32-D0WD-V3?
The AMS1117-3.3, TCAN332DR and W25Q32JVSSIQ appear in the most repositories here.
Which microcontrollers do boards using the ESP32-D0WD-V3 use?
Most are built on ESP32 (4) and RP2040/RP2350 (2).
How big is a typical board using the ESP32-D0WD-V3?
The median is 57.5 × 59.2 mm, and 33% are two-layer designs.
What is the most popular open source board using the ESP32-D0WD-V3?
By GitHub stars, Iot esp eth com by uysan, with 19 stars.
Can I simulate one of these boards using the ESP32-D0WD-V3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.