8 open source boards using the ESP32-D0WD-V3
Real designs built with the ESP32-D0WD-V3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Iot esp eth com
uysan
29.5 × 64.5 mm146 parts4LCERN-OHL-P-2.019ESP32
ESP32-D0WD-V3-ControlStand-V0-0
RobertPHeller
34.5 × 23.1 mm166 parts2LGPL-3.03ESP32
Iot esp eth ind
wayri
29.5 × 64.5 mm146 parts4LCustom license1ESP32
ECE445L Lab7Restart
Andres-Wearden
150 × 90 mm83 parts2LNo license0ESP32
Iot esp eth ind
uysan
29.5 × 64.5 mm146 parts4LCERN-OHL-P-2.019RP2040/RP2350
Frank next proto
rh1tech
80.6 × 54 mm204 parts4LGPL-3.03ESP32
ESP32-D0WD-V3-MultiFunction
RobertPHeller
104.1 × 127 mm137 parts2LCC-BY-4.03RP2040/RP2350
Frank air
rh1tech
85.6 × 54 mm176 parts4LGPL-3.03
How designs wire the ESP32-D0WD-V3
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-D0WD-V3 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDA pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The CHIP_PU pin has a capacitor to GND on 6 of 6 designs, most often 3.3 nF (then 1 µF).
- The VDD3P3_RTC pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The VDD3P3_CPU pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDApin 1, 43, 46 | Connected to: 3.3V 83% · a signal 17% |
|
| LNA_INpin 2 | Connected to: Signal 83% · not connected 17% |
|
| VDD3P3pin 3, 4 | Connected to: 3.3V 83% · a signal 17% |
|
| SENSOR_VP/GPIO36/ADC1_CHpin 5 | Connected to: A connector 50% · not connected 33% |
|
| SENSOR_CAPP/GPIO37/ADC1_pin 6 | Connected to: A connector 33% · not connected 33% |
|
| SENSOR_CAPN/GPIO38/ADC1_pin 7 | Connected to: A connector 33% · not connected 33% |
|
| SENSOR_VN/GPIO39/ADC1_CHpin 8 | Connected to: A connector 50% · not connected 33% |
|
| CHIP_PUpin 9 | Connected to: Signal 100% |
|
| VDET_1/GPIO34/ADC1_CH6/Rpin 10 | Connected to: A connector 50% · not connected 33% |
|
| VDET_2/GPIO35/ADC1_CH7/Rpin 11 | Connected to: A connector 50% · not connected 33% |
|
| 32K_XP/GPIO32/ADC1_CH4/Rpin 12 | Connected to: Signal 67% · not connected 33% |
|
| 32K_XN/GPIO33/ADC1_CH5/Rpin 13 | Connected to: Signal 67% · not connected 33% |
|
| GPIO25/ADC2_CH8/RTC_GPIOpin 14 | Connected to: Signal 67% · not connected 33% |
|
| GPIO26/ADC2_CH9/RTC_GPIOpin 15 | Connected to: Signal 67% · not connected 33% |
|
| MTDI/GPIO12/ADC2_CH5/RTCpin 18 | Connected to: A connector 33% · not connected 17% |
|
| VDD3P3_RTCpin 19 | Connected to: 3.3V 83% · a signal 17% |
|
| MTCK/GPIO13/ADC2_CH4/RTCpin 20 | Connected to: A connector 33% · not connected 17% |
|
| GPIO0/ADC2_CH1/RTC_GPIO1pin 23 | Connected to: SN74AUP1G126DBVR 33%, a connector 33% |
|
| GPIO4/ADC2_CH0/RTC_GPIO1pin 24 | Connected to: SN74AUP1G126DBVR 33%, TCAN332DR 33% · not connected 17% |
|
| VDD_SDIOpin 26 | Connected to: VIO 83% · not connected 17% |
|
| GPIO18/HS1_DATA7/VSPICLKpin 35 | Connected to: Signal 100% |
|
| GPIO23/HS1_STROBE/VSPIDpin 36 | Connected to: Signal 100% |
|
| VDD3P3_CPUpin 37 | Connected to: 3.3V 83% · a signal 17% |
|
| GPIO19/U0CTS/VSPIQ/EMAC_pin 38 | Connected to: Signal 100% |
|
| GPIO22/U0RTS/VSPIWP/EMACpin 39 | Connected to: Signal 83% · not connected 17% |
|
| U0RXD/GPIO3/CLK_OUT2pin 40 | Connected to: SN74AHC1G08DBVR 33% |
|
| U0TXD/GPIO1/CLK_OUT3/EMApin 41 | Connected to: Signal 100% |
|
| GPIO21/VSPIHD/EMAC_TX_ENpin 42 | Connected to: Signal 83% · not connected 17% |
|
| XTAL_Npin 44 | Connected to: Signal 83% · not connected 17% |
|
| XTAL_Ppin 45 | Connected to: Signal 83% · not connected 17% |
|
| CAP2pin 47 | Connected to: Signal 83% · not connected 17% |
|
| CAP1pin 48 | Connected to: Signal 83% · not connected 17% |
|
| GNDpin 49 | Connected to: GND 100% | — |
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Iot esp eth com by uysan, Frank air by rh1tech, ESP32-D0WD-V3-ControlStand-V0-0 by RobertPHeller and ESP32-D0WD-V3-MultiFunction by RobertPHeller.
The ESP32-D0WD-V3 in open source designs
The gallery holds 8 open source boards using the ESP32-D0WD-V3 from 6 GitHub repositories; a typical one measures about 57.5 × 64.5 mm and carries around 146 components.
63% use four copper layers or more, and 75% carry an open source license.
The most starred is Iot esp eth com by uysan.
Parts used alongside the ESP32-D0WD-V3
Microcontrollers on boards using the ESP32-D0WD-V3
What boards using the ESP32-D0WD-V3 are built for
ESP32-D0WD-V3: common questions
Where can I find a ESP32-D0WD-V3 reference design?
Each of the 8 boards on this page is a real design using the ESP32-D0WD-V3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ESP32-D0WD-V3 VDDA pin?
The VDDA pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the ESP32-D0WD-V3.
How is the ESP32-D0WD-V3 CHIP_PU pin connected?
The CHIP_PU pin has a capacitor to GND on 6 of 6 designs, most often 3.3 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the ESP32-D0WD-V3.
What decoupling capacitors do designs use on the ESP32-D0WD-V3 VDD3P3_RTC pin?
The VDD3P3_RTC pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the ESP32-D0WD-V3.
What parts are used alongside the ESP32-D0WD-V3?
The AMS1117-3.3, APX811-29UG-7, AZ1117IH-3.3TRG1, CH340G and RTL8201FI-VC-CG appear in the most repositories here.
Which microcontrollers do boards using the ESP32-D0WD-V3 use?
Most are built on ESP32 (6) and RP2040/RP2350 (2).
How big is a typical board using the ESP32-D0WD-V3?
The median is 57.5 × 64.5 mm, and 38% are two-layer designs.
What is the most popular open source board using the ESP32-D0WD-V3?
By GitHub stars, Iot esp eth com by uysan, with 19 stars.
Can I simulate one of these boards using the ESP32-D0WD-V3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.