5 open source boards using the FUSB302B01MPX
Real designs built with the FUSB302B01MPX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Psdaptwor
Swyter
101.3 × 63.5 mm88 parts4LCERN-OHL-S-2.022
RP2040/RP2350Bottom board palmtop
ZeroPhone
110 × 89 mm327 parts2LCERN-OHL-S-2.02
RP2040/RP2350D2000-mitx
mothenjoyer69
170 × 170 mm465 parts6LMIT1
RP2040/RP2350Simple rp235x
59 × 21.5 mm46 parts2LMIT1
STM32Stm32-usbcpd trigger
24.4 × 14 mm22 parts2LMIT1
The FUSB302B01MPX in open source designs
The gallery holds 5 open source boards using the FUSB302B01MPX from 3 GitHub repositories; a typical one measures about 101.3 × 63.5 mm and carries around 88 components.
60% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Psdaptwor by Swyter.
Parts used alongside the FUSB302B01MPX
Microcontrollers on boards using the FUSB302B01MPX
FUSB302B01MPX: common questions
Where can I find a FUSB302B01MPX reference design?
Each of the 5 boards on this page is a real design using the FUSB302B01MPX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the FUSB302B01MPX use?
Most are built on RP2040/RP2350 (4) and STM32 (1).
How big is a typical board using the FUSB302B01MPX?
The median is 101.3 × 63.5 mm, and 60% are two-layer designs.
What is the most popular open source board using the FUSB302B01MPX?
By GitHub stars, Psdaptwor by Swyter, with 22 stars.
Can I simulate one of these boards using the FUSB302B01MPX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.