3 open source boards using the IIM-42653
Real designs built with the IIM-42653, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Active drag system
RocketryVT
33 × 90 mm75 parts4LMIT6
RP2040/RP2350Active drag system minimal
33 × 81.8 mm67 parts4LMIT6
STM32G6
parsa-novin
127 × 127 mm45 parts4LNo license2
The IIM-42653 in open source designs
The gallery holds 3 open source boards using the IIM-42653 from 2 GitHub repositories; a typical one measures about 33 × 90 mm and carries around 67 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Active drag system by RocketryVT.
Microcontrollers on boards using the IIM-42653
IIM-42653: common questions
Where can I find a IIM-42653 reference design?
Each of the 3 boards on this page is a real design using the IIM-42653. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the IIM-42653 use?
Most are built on RP2040/RP2350 (2) and STM32 (1).
How big is a typical board using the IIM-42653?
The median is 33 × 90 mm, and 0% are two-layer designs.
What is the most popular open source board using the IIM-42653?
By GitHub stars, Active drag system by RocketryVT, with 6 stars.
Can I simulate one of these boards using the IIM-42653 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.