2 open source boards using the INA180B2
Real designs built with the INA180B2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32ESC-Development-Board
10x-Aero
66 × 61.8 mm82 parts4LNo license75
Esc
cookiemonsternz
28.3 × 28.3 mm132 parts6LNo license5
The INA180B2 in open source designs
The gallery holds 2 open source boards using the INA180B2 from 2 GitHub repositories; a typical one measures about 47.1 × 45 mm and carries around 107 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is ESC-Development-Board by 10x-Aero.
Microcontrollers on boards using the INA180B2
What boards using the INA180B2 are built for
INA180B2: common questions
Where can I find a INA180B2 reference design?
Each of the 2 boards on this page is a real design using the INA180B2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA180B2 use?
Most are built on STM32 (1).
How big is a typical board using the INA180B2?
The median is 47.1 × 45 mm, and 0% are two-layer designs.
What is the most popular open source board using the INA180B2?
By GitHub stars, ESC-Development-Board by 10x-Aero, with 75 stars.
Can I simulate one of these boards using the INA180B2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.