4 open source boards using the INA180B2
Real designs built with the INA180B2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
ESC-Development-Board
10x-Aero
66 × 61.8 mm82 parts4LNo license75Esc
cookiemonsternz
28.3 × 28.3 mm132 parts6LNo license5FPGA
Tedium X8
jboone
96 × 70 mm279 parts4LBSD-3-Clause3STM32
Am32-bldc esc
adsayan7
66 × 61.8 mm82 parts4LNo license0
The INA180B2 in open source designs
The gallery holds 4 open source boards using the INA180B2 from 4 GitHub repositories; a typical one measures about 66 × 61.8 mm and carries around 107 components.
100% use four copper layers or more, and 25% carry an open source license.
The most starred is ESC-Development-Board by 10x-Aero.
Parts used alongside the INA180B2
What boards using the INA180B2 are built for
INA180B2: common questions
Where can I find a INA180B2 reference design?
Each of the 4 boards on this page is a real design using the INA180B2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the INA180B2?
The DRV8300DPWR, STM32F051K8Ux and TPS62932 appear in the most repositories here.
Which microcontrollers do boards using the INA180B2 use?
Most are built on STM32 (2) and FPGA (1).
How big is a typical board using the INA180B2?
The median is 66 × 61.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the INA180B2?
By GitHub stars, ESC-Development-Board by 10x-Aero, with 75 stars.
Can I simulate one of these boards using the INA180B2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.