6 open source boards using the INA219BIDCNT
Real designs built with the INA219BIDCNT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoSatelliteController2.0
tokai-student-rocket-project
150 × 100 mm221 parts2LMIT2
AVR/ArduinoSatelliteController
150 × 100 mm185 parts2LMIT2
STM32PDNode-PDCard-4242
DvidMakesThings
57.2 × 29.9 mm74 parts6LAGPL-3.082
AVR/ArduinoLaunchController2.0
150 × 100 mm180 parts2LMIT2
AVR/ArduinoLaunchController
150 × 100 mm153 parts2LMIT2
ESP32SatelliteNode
80 × 60 mm29 parts2LMIT2
The INA219BIDCNT in open source designs
The gallery holds 6 open source boards using the INA219BIDCNT from 2 GitHub repositories; a typical one measures about 150 × 100 mm and carries around 167 components.
83% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is PDNode-PDCard-4242 by DvidMakesThings.
Microcontrollers on boards using the INA219BIDCNT
What boards using the INA219BIDCNT are built for
INA219BIDCNT: common questions
Where can I find a INA219BIDCNT reference design?
Each of the 6 boards on this page is a real design using the INA219BIDCNT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA219BIDCNT use?
Most are built on AVR/Arduino (4), ESP32 (1) and STM32 (1).
How big is a typical board using the INA219BIDCNT?
The median is 150 × 100 mm, and 83% are two-layer designs.
What is the most popular open source board using the INA219BIDCNT?
By GitHub stars, PDNode-PDCard-4242 by DvidMakesThings, with 82 stars.
Can I simulate one of these boards using the INA219BIDCNT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.