2 open source boards using the LC709203
Real designs built with the LC709203, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPTympan Rev E Hardware
Tympan
38 × 74 mm88 parts4LMIT14
Nordic nRFTympan Rev F
38 × 74 mm86 parts4LCERN-OHL-P-2.07
The LC709203 in open source designs
The gallery holds 2 open source boards using the LC709203 from 2 GitHub repositories; a typical one measures about 38 × 74 mm and carries around 87 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Tympan Rev E Hardware by Tympan.
Parts used alongside the LC709203
Microcontrollers on boards using the LC709203
What boards using the LC709203 are built for
LC709203: common questions
Where can I find a LC709203 reference design?
Each of the 2 boards on this page is a real design using the LC709203. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LC709203?
The 74LVC1G66, LP5907MFX-1.8, MCP73831, Teensy4.1 and TLV320AIC3206IRSBT appear in the most repositories here.
Which microcontrollers do boards using the LC709203 use?
Most are built on Nordic nRF (1) and NXP (1).
How big is a typical board using the LC709203?
The median is 38 × 74 mm, and 0% are two-layer designs.
What is the most popular open source board using the LC709203?
By GitHub stars, Tympan Rev E Hardware by Tympan, with 14 stars.
Can I simulate one of these boards using the LC709203 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.