5 open source boards using the 74LVC1G66
Real designs built with the 74LVC1G66, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Z2m partner
smarthomefans
50 × 50 mm50 parts2LNo license187Silicon Labs
MWGEN-G1
MR-DOS
100 × 100 mm341 parts4LGPL-3.018NXP
Tympan Rev E Hardware
Tympan
38 × 74 mm88 parts4LMIT14Nordic nRF
Tympan Rev F
Tympan
38 × 74 mm86 parts4LCERN-OHL-P-2.07STM32
LCRmeter
ironiron
64 × 55.3 mm68 parts2LMIT0
How designs wire the 74LVC1G66
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74LVC1G66 connects to, and the resistors, capacitors and other passives placed on it.
- The I/O pin has a series resistor on 4 of 5 designs, most often 2.2 kΩ (then 10 kΩ).
- The O/I pin has a series resistor on 4 of 5 designs, most often 2.2 kΩ (then 100 Ω).
- The ON pin has a resistor to GND on 2 of 5 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| I/Opin 1 | Connected to: TLV320AIC3206IRSBT 40% |
|
| O/Ipin 2 | Connected to: The microcontroller 40% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| ONpin 4 | Connected to: The microcontroller 80% |
|
| VCC_FREFpin 5 | Connected to: 3.3V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Z2m partner by smarthomefans, MWGEN-G1 by MR-DOS, Tympan Rev E Hardware by Tympan and Tympan Rev F by Tympan.
The 74LVC1G66 in open source designs
The gallery holds 5 open source boards using the 74LVC1G66 from 5 GitHub repositories; a typical one measures about 50 × 74 mm and carries around 86 components.
60% use four copper layers or more, and 80% carry an open source license.
The most starred is Z2m partner by smarthomefans.
Parts used alongside the 74LVC1G66
Microcontrollers on boards using the 74LVC1G66
What boards using the 74LVC1G66 are built for
74LVC1G66: common questions
Where can I find a 74LVC1G66 reference design?
Each of the 5 boards on this page is a real design using the 74LVC1G66. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the 74LVC1G66 I/O pin?
The I/O pin has a series resistor on 4 of 5 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the 74LVC1G66.
What resistor goes on the 74LVC1G66 O/I pin?
The O/I pin has a series resistor on 4 of 5 designs, most often 2.2 kΩ (then 100 Ω). Counted from the KiCad layouts of 5 open source designs using the 74LVC1G66.
What resistor goes on the 74LVC1G66 ON pin?
The ON pin has a resistor to GND on 2 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the 74LVC1G66.
What parts are used alongside the 74LVC1G66?
The LC709203, LP5907MFX-1.8, MCP73831, Teensy4.1 and TLV320AIC3206IRSBT appear in the most repositories here.
Which microcontrollers do boards using the 74LVC1G66 use?
Most are built on ESP32 (1), Nordic nRF (1), NXP (1) and Silicon Labs (1).
How big is a typical board using the 74LVC1G66?
The median is 50 × 74 mm, and 40% are two-layer designs.
What is the most popular open source board using the 74LVC1G66?
By GitHub stars, Z2m partner by smarthomefans, with 187 stars.
Can I simulate one of these boards using the 74LVC1G66 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.