2 open source boards using the LIS2DH

Real designs built with the LIS2DH, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The LIS2DH in open source designs

The gallery holds 2 open source boards using the LIS2DH from 2 GitHub repositories; a typical one measures about 37 × 23.3 mm and carries around 21 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Tinypulse by jonnor.

Microcontrollers on boards using the LIS2DH

AVR/Arduino 1

What boards using the LIS2DH are built for

LIS2DH: common questions

Where can I find a LIS2DH reference design?

Each of the 2 boards on this page is a real design using the LIS2DH. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LIS2DH use?

Most are built on AVR/Arduino (1).

How big is a typical board using the LIS2DH?

The median is 37 × 23.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the LIS2DH?

By GitHub stars, Tinypulse by jonnor, with 315 stars.

Can I simulate one of these boards using the LIS2DH before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.