11 open source boards using the LM358
Real designs built with the LM358, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Core
shmoergh
215 × 100 mm285 parts2LNo license123
Microchip SAMNode
ParadigmHyperloop
127 × 127 mm390 parts4LCustom license11
Pressure sensor module
CV19CO
29 × 29.5 mm10 parts4LCERN-OHL-P-2.05
403SFM3020 sensor module
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05
ESP32SensactHsIO3
klaus-liebler
90 × 53 mm187 parts2LApache-2.04
ABPDANT015PGAA5 sensor module
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05
ABPDANT060MGAA5 sensor module
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05
ABPDJJT001PGAA5 sensor module
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05
.sensor oxigeno
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05
ESP32SensactHsNano3
90 × 56 mm122 parts2LApache-2.04- schematic only · 234 partsSTM32
Fx3u 24mr
eddyem
234 parts2LNo license206
The LM358 in open source designs
The gallery holds 11 open source boards using the LM358 from 5 GitHub repositories; a typical one measures about 29 × 29.5 mm and carries around 10 components.
64% use four copper layers or more, and 73% carry an open source license.
The most starred is Fx3u 24mr by eddyem.
Parts used alongside the LM358
Microcontrollers on boards using the LM358
What boards using the LM358 are built for
LM358: common questions
Where can I find a LM358 reference design?
Each of the 11 boards on this page is a real design using the LM358. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LM358?
The AMS1117-3.3, EL817 and W5500 appear in the most repositories here.
Which microcontrollers do boards using the LM358 use?
Most are built on ESP32 (2), Microchip SAM (1) and STM32 (1).
How big is a typical board using the LM358?
The median is 29 × 29.5 mm, and 36% are two-layer designs.
What is the most popular open source board using the LM358?
By GitHub stars, Fx3u 24mr by eddyem, with 206 stars.
Can I simulate one of these boards using the LM358 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.