6 open source boards using the LM76005RNPR
Real designs built with the LM76005RNPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoHw openmower yardforce
xtech
180 × 170 mm275 parts4LCC-BY-4.012
STM32BLDC MC V1.0
AhmedAbo-Eita
123.5 × 58 mm223 parts8LNo license3
STM32Bench robotics controller 5eab0a5d
mrcha033
160 × 100 mm42 parts4LApache-2.02
STM32BLDC Motor Driver
123.5 × 58 mm223 parts8LNo license1
STM32Bench robotics controller b204035a
160 × 100 mm42 parts4LApache-2.02
STM32Quadruped robot controller
160 × 100 mm42 parts4LApache-2.02
The LM76005RNPR in open source designs
The gallery holds 6 open source boards using the LM76005RNPR from 4 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 133 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Hw openmower yardforce by xtech.
Parts used alongside the LM76005RNPR
Microcontrollers on boards using the LM76005RNPR
What boards using the LM76005RNPR are built for
LM76005RNPR: common questions
Where can I find a LM76005RNPR reference design?
Each of the 6 boards on this page is a real design using the LM76005RNPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LM76005RNPR?
The 25LC256-E/SN, DRV8353HRTAR, LDL1117S33R, LM74700QDRQ1 and NCV4274ADT50RKG appear in the most repositories here.
Which microcontrollers do boards using the LM76005RNPR use?
Most are built on STM32 (5) and AVR/Arduino (1).
How big is a typical board using the LM76005RNPR?
The median is 160 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the LM76005RNPR?
By GitHub stars, Hw openmower yardforce by xtech, with 12 stars.
Can I simulate one of these boards using the LM76005RNPR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.