12 open source boards using the TLV9061IDBVR

Real designs built with the TLV9061IDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the TLV9061IDBVR

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the TLV9061IDBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The V+_5 pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF).
  • The V-_2 pin is tied to GND on 11 of 12 designs.
  • The OUT_1 pin has a series resistor on 9 of 12 designs, most often 10 kΩ (then 100 Ω).
  • The IN+_3 pin has a series resistor on 9 of 12 designs, most often 1 MΩ (then 10 kΩ).
OUT_1pin 1Connected to: Signal 92%
  • Series resistor on 75% · 10 kΩ (2), 100 Ω (2), 47 Ω (2)
V-_2pin 2Connected to: GND 92%
IN+_3pin 3Connected to: Signal 92%
  • Series resistor on 75% · 1 MΩ (4), 10 kΩ (2), 2.2 kΩ (2)
  • Capacitor to GND on 50% · 1 nF (2), 220 pF (1), 100 nF (1)
  • Resistor to GND on 42% · 220 kΩ (2), 1 kΩ (1), 1 MΩ (1)
IN-_4pin 4Connected to: Signal 92%
  • Series resistor on 75% · 1 kΩ (2), 47 Ω (2), 33 Ω (2)
V+_5pin 5Connected to: 3.3V 92%
  • Decoupling capacitor on 83% · 100 nF (12), 1 µF (2), 10 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BLDC MC V1.0 by AhmedAbo-Eita, BLDC Motor Driver by AhmedAbo-Eita, Ec scan module by Diwamoto and EEG-PCB by MariusFauteux.

The TLV9061IDBVR in open source designs

The gallery holds 12 open source boards using the TLV9061IDBVR from 12 GitHub repositories; a typical one measures about 99 × 70 mm and carries around 89 components.

75% use four copper layers or more, and 25% carry an open source license.

The most starred is BLDC MC V1.0 by AhmedAbo-Eita.

Microcontrollers on boards using the TLV9061IDBVR

TLV9061IDBVR: common questions

Where can I find a TLV9061IDBVR reference design?

Each of the 12 boards on this page is a real design using the TLV9061IDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TLV9061IDBVR V+_5 pin?

The V+_5 pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the TLV9061IDBVR.

How is the TLV9061IDBVR V-_2 pin connected?

The V-_2 pin is tied to GND on 11 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the TLV9061IDBVR.

What resistor goes on the TLV9061IDBVR OUT_1 pin?

The OUT_1 pin has a series resistor on 9 of 12 designs, most often 10 kΩ (then 100 Ω). Counted from the KiCad layouts of 12 open source designs using the TLV9061IDBVR.

What parts are used alongside the TLV9061IDBVR?

The USBLC6-2SC6, 25LC256-E/SN, 74HC4053PW, AP2112K-3.3TRG1 and DRV8353HRTAR appear in the most repositories here.

Which microcontrollers do boards using the TLV9061IDBVR use?

Most are built on STM32 (4), RP2040/RP2350 (3) and PIC (1).

How big is a typical board using the TLV9061IDBVR?

The median is 99 × 70 mm, and 25% are two-layer designs.

What is the most popular open source board using the TLV9061IDBVR?

By GitHub stars, BLDC MC V1.0 by AhmedAbo-Eita, with 3 stars.

Can I simulate one of these boards using the TLV9061IDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part