8 open source boards using the STM32G431RBT6

Real designs built with the STM32G431RBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the STM32G431RBT6

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the STM32G431RBT6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 4.7 µF).
  • The VDD pins have a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 10 µF).
  • The VREF+ pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 4.7 µF).
  • The VDDA pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 4.7 µF).
VBATpin 1Connected to: 3.3V 88%
  • Decoupling capacitor on 100% · 100 nF (12), 4.7 µF (2), 10 µF (1)
PC13pin 2Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 33 Ω (2), 5.1 kΩ (1), 10 kΩ (1)
PC14_3pin 3Connected to: Signal 63% · not connected 38%
  • Crystal on 38% · 32.768 kHz (2)
  • Capacitor to GND on 38% · 20 pF (2), 10 pF (1)
PC15_4pin 4Connected to: Signal 63% · not connected 38%
  • Capacitor to GND on 50% · 20 pF (2), 2.2 µF (1), 10 pF (1)
  • Crystal on 38% · 32.768 kHz (2)
PF0_5pin 5Connected to: Signal 88%
  • Capacitor to GND on 75% · 30 pF (2), 25 pF (1), 28 pF (1)
  • Crystal on 63% · 7 MHz (2), 16 MHz (1)
PF1_6pin 6Connected to: Signal 88%
  • Series resistor on 50% · 0 Ω (2), 400 Ω (1), 100 kΩ (1)
  • Capacitor to GND on 50% · 28 pF (1), 10 pF (1), 22 pF (1)
PG10_7pin 7Connected to: A connector 75%
  • Pull-up to 3.3V on 75% · 10 kΩ (6)
  • Capacitor to GND on 75% · 100 nF (6), 1 µF (2)
PC0pin 8Connected to: Signal 88%
  • Series resistor on 38% · 33 Ω (2), 10 kΩ (1)
PC1pin 9Connected to: A connector 38%
  • Series resistor on 75% · 33 Ω (2), 22 kΩ (1), 5.1 kΩ (1)
  • Capacitor to GND on 63% · 100 nF (3), 1 nF (1), 2.2 µF (1)
  • Resistor to GND on 50% · 10 kΩ (2), 24.9 kΩ (1), 3.3 kΩ (1)
PC2pin 10Connected to: A connector 25% · not connected 25%
  • Capacitor to GND on 50% · 100 nF (2), 1 nF (1), 2.2 µF (1)
  • Resistor to GND on 38% · 24.9 kΩ (1), 3.3 kΩ (1), 10 kΩ (1)
  • Series resistor on 38% · 22 kΩ (1), 5.1 kΩ (1), 1 kΩ (1)
PC3pin 11Connected to: TLV9061IDBVR 25%, a connector 25%
  • Capacitor to GND on 38% · 100 nF (1), 2.2 µF (1), 10 nF (1)
  • Series resistor on 38% · 22 kΩ (1), 5.1 kΩ (1), 1 kΩ (1)
PA0pin 12Connected to: DRV8353HRTAR 25%
  • Series resistor on 38% · 680 Ω (1), 270 Ω (1), 5.1 kΩ (1)
PA1pin 13Connected to: DRV8353HRTAR 25%
  • Capacitor to GND on 50% · 100 nF (2), 24 pF (1), 2.2 µF (1)
  • Series resistor on 50% · 100 kΩ (1), 270 Ω (1), 5.1 kΩ (1)
  • Resistor to GND on 38% · 10 kΩ (2), 24.9 kΩ (1)
PA2pin 14Connected to: DRV8353HRTAR 25%
  • Series resistor on 50% · 220 Ω (1), 5.1 kΩ (1), 120 kΩ (1)
  • Capacitor to GND on 38% · 100 nF (2), 2.2 µF (1)
VSSpin 15, 31, 47, 63Connected to: GND 97%
VDDpin 16, 32, 48, 64Connected to: 3.3V 84% · a signal 16%
  • Decoupling capacitor on 100% · 100 nF (57), 10 µF (6), 4.7 µF (5)
PA3pin 17Connected to: TLV9061IDBVR 25%
  • Series resistor on 50% · 220 Ω (1), 5.1 kΩ (1), 10 kΩ (1)
  • Capacitor to GND on 38% · 100 nF (2), 2.2 µF (1)
PA4pin 18Connected to: Signal 75%
  • Series resistor on 50% · 33 Ω (2), 220 Ω (1), 5.1 kΩ (1)
PA5pin 19Connected to: Signal 88%
  • Series resistor on 38% · 33 Ω (2), 5.1 kΩ (1)
PA6pin 20Connected to: Signal 88%
  • Series resistor on 38% · 33 Ω (2), 5.1 kΩ (1)
PA7pin 21Connected to: Signal 88%
  • Series resistor on 50% · 33 Ω (2), 5.1 kΩ (1), 60.4 kΩ (1)
PC5pin 23Connected to: Signal 75% · not connected 25%
  • Series resistor on 38% · 33 Ω (2), 5.1 kΩ (1)
PB0pin 24Connected to: Signal 100%
  • Series resistor on 50% · 33 Ω (2), 5.1 kΩ (1), 10 kΩ (1)
PB1pin 25Connected to: Signal 100%
  • Series resistor on 50% · 33 Ω (2), 5.1 kΩ (1), 10 kΩ (1)
VSSApin 27Connected to: GND 88%
VREF+pin 28Connected to: 3.3V 75%
  • Decoupling capacitor on 88% · 100 nF (15), 4.7 µF (2), 1 µF (2)
VDDApin 29Connected to: 3.3V 75%
  • Decoupling capacitor on 88% · 100 nF (15), 4.7 µF (2), 1 µF (2)
PB11pin 33Connected to: Not connected 63% · a signal 38%
PB12pin 34Connected to: Signal 88%
  • Series resistor on 38% · 0 Ω (2), 680 Ω (1)
PC8pin 40Connected to: A connector 25%
  • Series resistor on 38% · 33 Ω (2), 680 Ω (1)
PA9pin 43Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 33 Ω (3), 220 Ω (1)
PA10pin 44Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 33 Ω (3), 220 Ω (1)
PC12pin 54Connected to: Not connected 63% · a signal 38%
PD2pin 55Connected to: Not connected 75% · a signal 25%
PB4pin 57Connected to: Not connected 50% · a signal 50%
  • Series resistor on 38% · 1 kΩ (1), 5.1 kΩ (1), 33 Ω (1)
PB8_61pin 61Connected to: Signal 100%
  • Resistor to GND on 75% · 10 kΩ (6)
PB9pin 62Connected to: Signal 63% · not connected 38%
  • Series resistor on 38% · 33 Ω (2), 5.1 kΩ (1)

21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Yeti Power Board by PionixPublic, BLDC MC V1.0 by AhmedAbo-Eita, STM32-FOC-Control by Gokasimov and BLDC Motor Driver by AhmedAbo-Eita.

The STM32G431RBT6 in open source designs

The gallery holds 8 open source boards using the STM32G431RBT6 from 8 GitHub repositories; a typical one measures about 123.5 × 100 mm and carries around 223 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Yeti Power Board by PionixPublic.

Microcontrollers on boards using the STM32G431RBT6

STM32G431RBT6: common questions

Where can I find a STM32G431RBT6 reference design?

Each of the 8 boards on this page is a real design using the STM32G431RBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32G431RBT6 VBAT pin?

The VBAT pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G431RBT6.

What decoupling capacitors do designs use on the STM32G431RBT6 VDD pin?

The VDD pins have a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G431RBT6.

What decoupling capacitors do designs use on the STM32G431RBT6 VREF+ pin?

The VREF+ pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G431RBT6.

What parts are used alongside the STM32G431RBT6?

The USBLC6-2SC6, 25LC256-E/SN, DRV8353HRTAR, LDL1117S33R and LM74700QDRQ1 appear in the most repositories here.

Which microcontrollers do boards using the STM32G431RBT6 use?

Most are built on STM32 (7) and ESP32 (1).

How big is a typical board using the STM32G431RBT6?

The median is 123.5 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the STM32G431RBT6?

By GitHub stars, Yeti Power Board by PionixPublic, with 68 stars.

Can I simulate one of these boards using the STM32G431RBT6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part