6 open source boards using the LMV358
Real designs built with the LMV358, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoUSBcablecracker
szdiy
100 × 50 mm56 parts2LCC-BY-SA-4.08
AVR/ArduinoTaggerMainboard
Infinitag
158 × 34 mm55 parts2LNo license6
PICTurnoutBoss
JimKueneman
164.5 × 86.8 mm207 parts2LNo license1
AVR/ArduinoShield offset
apmarshall3
83.2 × 78.1 mm125 parts4LNo license0
AVR/ArduinoShield
83.2 × 69.2 mm82 parts2LNo license0
AVR/ArduinoArduino
odobot
43.3 × 50 mm41 parts4LNo license1
The LMV358 in open source designs
The gallery holds 6 open source boards using the LMV358 from 5 GitHub repositories; a typical one measures about 91.6 × 59.6 mm and carries around 69 components.
67% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is USBcablecracker by szdiy.
Microcontrollers on boards using the LMV358
What boards using the LMV358 are built for
LMV358: common questions
Where can I find a LMV358 reference design?
Each of the 6 boards on this page is a real design using the LMV358. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LMV358 use?
Most are built on AVR/Arduino (5) and PIC (1).
How big is a typical board using the LMV358?
The median is 91.6 × 59.6 mm, and 67% are two-layer designs.
What is the most popular open source board using the LMV358?
By GitHub stars, USBcablecracker by szdiy, with 8 stars.
Can I simulate one of these boards using the LMV358 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.