2 open source boards using the LP2985_10
Real designs built with the LP2985_10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Radar MCU
ckflight
36.9 × 32.9 mm98 parts4LGPL-3.055
STM32Radar MCU
TonyStark2007
36.9 × 32.9 mm98 parts4LGPL-3.015
The LP2985_10 in open source designs
The gallery holds 2 open source boards using the LP2985_10 from 2 GitHub repositories; a typical one measures about 36.9 × 32.9 mm and carries around 98 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Radar MCU by ckflight.
Parts used alongside the LP2985_10
Microcontrollers on boards using the LP2985_10
What boards using the LP2985_10 are built for
LP2985_10: common questions
Where can I find a LP2985_10 reference design?
Each of the 2 boards on this page is a real design using the LP2985_10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LP2985_10?
The AP3211, LT1817, MAX1426, MCP4022_202 and STM32F405 appear in the most repositories here.
Which microcontrollers do boards using the LP2985_10 use?
Most are built on STM32 (2).
How big is a typical board using the LP2985_10?
The median is 36.9 × 32.9 mm, and 0% are two-layer designs.
What is the most popular open source board using the LP2985_10?
By GitHub stars, Radar MCU by ckflight, with 55 stars.
Can I simulate one of these boards using the LP2985_10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.