3 open source boards using the MCP1700T-3302E/MB
Real designs built with the MCP1700T-3302E/MB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAMTiny4FSK
New-England-Weather-Balloon-Society
35.1 × 76.3 mm80 parts4LCERN-OHL-W-2.095
Microchip SAMOpenFence
plyalex
57 × 97 mm74 parts2LGPL-3.028
STM32Stm32mp1-custom devboard
voloviq
120 × 80.6 mm194 parts4LNo license7
The MCP1700T-3302E/MB in open source designs
The gallery holds 3 open source boards using the MCP1700T-3302E/MB from 3 GitHub repositories; a typical one measures about 57 × 80.6 mm and carries around 80 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Tiny4FSK by New-England-Weather-Balloon-Society.
Microcontrollers on boards using the MCP1700T-3302E/MB
What boards using the MCP1700T-3302E/MB are built for
MCP1700T-3302E/MB: common questions
Where can I find a MCP1700T-3302E/MB reference design?
Each of the 3 boards on this page is a real design using the MCP1700T-3302E/MB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP1700T-3302E/MB use?
Most are built on Microchip SAM (2) and STM32 (1).
How big is a typical board using the MCP1700T-3302E/MB?
The median is 57 × 80.6 mm, and 33% are two-layer designs.
What is the most popular open source board using the MCP1700T-3302E/MB?
By GitHub stars, Tiny4FSK by New-England-Weather-Balloon-Society, with 95 stars.
Can I simulate one of these boards using the MCP1700T-3302E/MB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.