10 open source boards using the MCP3002
Real designs built with the MCP3002, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PedalPiV2
thawney
72.4 × 91.4 mm47 parts2LGPL-3.044
Pi plant
rringler
33 × 30.5 mm11 parts2LMIT9
Cyclope
RICCIARDI-Adrien
100 × 84 mm75 parts2LMIT5
RP2040/RP2350Procon gcc main
ESCA47
110.9 × 59.5 mm69 parts2LCERN-OHL-S-2.04
RP2040/RP2350V4d2 pico
tomcombriat
54.2 × 94.2 mm99 parts2LTAPR-OHL-1.03
RP2040/RP2350Zinnia2 0 5
plants-tech
125.4 × 90.3 mm70 parts2LCERN-OHL-S-2.02
Raspberry PiMain PCB (w/o Adaptor)
cinnamondev
95.9 × 83.3 mm145 parts4LCERN-OHL-S-2.01
RP2040/RP2350V4d3 pico
54.2 × 94.2 mm99 parts2LTAPR-OHL-1.03
RP2040/RP2350V4 pico
54.2 × 95.2 mm96 parts2LTAPR-OHL-1.03
RP2040/RP2350V4d1 pico
54.2 × 95.2 mm96 parts2LTAPR-OHL-1.03
The MCP3002 in open source designs
The gallery holds 10 open source boards using the MCP3002 from 7 GitHub repositories; a typical one measures about 63.3 × 90.8 mm and carries around 86 components.
90% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is PedalPiV2 by thawney.
Parts used alongside the MCP3002
Microcontrollers on boards using the MCP3002
What boards using the MCP3002 are built for
MCP3002: common questions
Where can I find a MCP3002 reference design?
Each of the 10 boards on this page is a real design using the MCP3002. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP3002 use?
Most are built on RP2040/RP2350 (6) and Raspberry Pi (1).
How big is a typical board using the MCP3002?
The median is 63.3 × 90.8 mm, and 90% are two-layer designs.
What is the most popular open source board using the MCP3002?
By GitHub stars, PedalPiV2 by thawney, with 44 stars.
Can I simulate one of these boards using the MCP3002 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.