3 open source boards using the MCP6002-I/P
Real designs built with the MCP6002-I/P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32PiezotesterV2.1
JakubJasiejko
119.3 × 97.4 mm49 parts2LMIT0
!!UNTESTED!!
niektb
50.5 × 128.5 mm124 parts2LCC-BY-SA-4.034
ESP32Urzadzenie badawcze V2
91.4 × 71.7 mm17 parts2LMIT0
The MCP6002-I/P in open source designs
The gallery holds 3 open source boards using the MCP6002-I/P from 2 GitHub repositories; a typical one measures about 91.4 × 97.3 mm and carries around 49 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is !!UNTESTED!! by niektb.
Microcontrollers on boards using the MCP6002-I/P
MCP6002-I/P: common questions
Where can I find a MCP6002-I/P reference design?
Each of the 3 boards on this page is a real design using the MCP6002-I/P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6002-I/P use?
Most are built on ESP32 (2).
How big is a typical board using the MCP6002-I/P?
The median is 91.4 × 97.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP6002-I/P?
By GitHub stars, !!UNTESTED!! by niektb, with 34 stars.
Can I simulate one of these boards using the MCP6002-I/P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.