3 open source boards using the MIC5504-2.5YM5

Real designs built with the MIC5504-2.5YM5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filtersOpen license only|Most starred Recently updated Most components

The MIC5504-2.5YM5 in open source designs

The gallery holds 3 open source boards using the MIC5504-2.5YM5 from 2 GitHub repositories; a typical one measures about 159.9 × 159.6 mm and carries around 493 components.

67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Flicker by danfoisy.

Microcontrollers on boards using the MIC5504-2.5YM5

What boards using the MIC5504-2.5YM5 are built for

MIC5504-2.5YM5: common questions

Where can I find a MIC5504-2.5YM5 reference design?

Each of the 3 boards on this page is a real design using the MIC5504-2.5YM5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MIC5504-2.5YM5 use?

Most are built on Raspberry Pi (2) and FPGA (1).

How big is a typical board using the MIC5504-2.5YM5?

The median is 159.9 × 159.6 mm, and 67% are two-layer designs.

What is the most popular open source board using the MIC5504-2.5YM5?

By GitHub stars, Flicker by danfoisy, with 38 stars.

Can I simulate one of these boards using the MIC5504-2.5YM5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.