12 open source boards using the NE5532DR
Real designs built with the NE5532DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AWG DHO8-900
MatthiasElectronic
58 × 77.4 mm200 parts4LCERN-OHL-W-2.0215
RP2040/RP2350RP2040 DSP - PCM3060
DMME-NL
166.2 × 92.6 mm105 parts2LGPL-3.071
Zx tsid
UzixLS
83 × 39.5 mm77 parts2LMIT22
FPGASEM hitachi-
Serhio4522
100 × 70 mm284 parts4LNo license1
OnerLAB BoCu
nahsteoner
78 × 118 mm120 parts2LNo license0
PC-KHARON-386-TOP
100 × 100 mm149 parts4LCC-BY-SA-4.0111
RP2040/RP2350RP2040 DSP Modular
166.2 × 92.6 mm100 parts2LGPL-3.071
STM32SmallDSPMicro
Gemuesesaft
100 × 100 mm284 parts4LGPL-3.01
Balanced Analog Output Board for SmallDSP
110 × 70 mm173 parts4LGPL-3.01
Unbalanced Analog Audio Output Board for SmallDSP
80 × 50 mm108 parts4LGPL-3.01
Balanced Analog Input Board for SmallDSP
110 × 60 mm85 parts4LGPL-3.01
Unbalanced Analog Audio Input Board for Small DSP
80 × 40 mm84 parts4LGPL-3.01
The NE5532DR in open source designs
The gallery holds 12 open source boards using the NE5532DR from 7 GitHub repositories; a typical one measures about 100 × 73.7 mm and carries around 114 components.
67% use four copper layers or more, and 83% carry an open source license.
The most starred is AWG DHO8-900 by MatthiasElectronic.
Parts used alongside the NE5532DR
Microcontrollers on boards using the NE5532DR
What boards using the NE5532DR are built for
NE5532DR: common questions
Where can I find a NE5532DR reference design?
Each of the 12 boards on this page is a real design using the NE5532DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the NE5532DR use?
Most are built on RP2040/RP2350 (2), FPGA (1) and STM32 (1).
How big is a typical board using the NE5532DR?
The median is 100 × 73.7 mm, and 33% are two-layer designs.
What is the most popular open source board using the NE5532DR?
By GitHub stars, AWG DHO8-900 by MatthiasElectronic, with 215 stars.
Can I simulate one of these boards using the NE5532DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.