14 open source boards using the NE5532DR
Real designs built with the NE5532DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AWG DHO8-900
MatthiasElectronic
58 × 77.4 mm200 parts4LCERN-OHL-W-2.0215RP2040/RP2350
RP2040 DSP - PCM3060
DMME-NL
166.2 × 92.6 mm105 parts2LGPL-3.072Zx tsid
UzixLS
83 × 39.5 mm77 parts2LMIT22ESP32
Uberamp1
DeepSOIC
130 × 82 mm520 parts2LNo license3FPGA
SEM hitachi-
Serhio4522
100 × 70 mm284 parts4LNo license1STM32
OM-GOD
Sojoooo
403.7 × 202.9 mm475 parts4LNo license0OnerLAB BoCu
nahsteoner
78 × 118 mm120 parts2LNo license0PC-KHARON-386-TOP
UzixLS
100 × 100 mm149 parts4LCC-BY-SA-4.0111RP2040/RP2350
RP2040 DSP Modular
DMME-NL
166.2 × 92.6 mm100 parts2LGPL-3.072STM32
SmallDSPMicro
Gemuesesaft
100 × 100 mm284 parts4LGPL-3.01Balanced Analog Output Board for SmallDSP
Gemuesesaft
110 × 70 mm173 parts4LGPL-3.01Unbalanced Analog Audio Output Board for SmallDSP
Gemuesesaft
80 × 50 mm108 parts4LGPL-3.01Balanced Analog Input Board for SmallDSP
Gemuesesaft
110 × 60 mm85 parts4LGPL-3.01Unbalanced Analog Audio Input Board for Small DSP
Gemuesesaft
80 × 40 mm84 parts4LGPL-3.01
How designs wire the NE5532DR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the NE5532DR connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series resistor on 8 of 9 designs, most often 4.7 kΩ (then 33 kΩ).
- The + pins have a series resistor on 7 of 9 designs, most often 1 MΩ (then 150 Ω).
- The OUT1 pin has a series capacitor on 5 of 9 designs, most often 10 µF (then 100 nF).
- The OUT1 pin has a series resistor on 5 of 9 designs, most often 100 Ω (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUT1pin 1 | Connected to: Signal 89% |
|
| -pin 2, 6 | Connected to: Signal 89% |
|
| +pin 3, 5 | Connected to: Signal 83% |
|
| V-pin 4 | Connected to: GND 44% · 6.5V 33% · a signal 22% |
|
| OUT2pin 7 | Connected to: Signal 89% |
|
| V+pin 8 | Connected to: VCC 78% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AWG DHO8-900 by MatthiasElectronic, PC-KHARON-386-TOP by UzixLS, RP2040 DSP Modular by DMME-NL and Zx tsid by UzixLS.
The NE5532DR in open source designs
The gallery holds 14 open source boards using the NE5532DR from 9 GitHub repositories; a typical one measures about 100 × 79.7 mm and carries around 135 components.
64% use four copper layers or more, and 71% carry an open source license.
The most starred is AWG DHO8-900 by MatthiasElectronic.
Parts used alongside the NE5532DR
Microcontrollers on boards using the NE5532DR
What boards using the NE5532DR are built for
NE5532DR: common questions
Where can I find a NE5532DR reference design?
Each of the 14 boards on this page is a real design using the NE5532DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the NE5532DR - pin?
The - pins have a series resistor on 8 of 9 designs, most often 4.7 kΩ (then 33 kΩ). Counted from the KiCad layouts of 9 open source designs using the NE5532DR.
What resistor goes on the NE5532DR + pin?
The + pins have a series resistor on 7 of 9 designs, most often 1 MΩ (then 150 Ω). Counted from the KiCad layouts of 9 open source designs using the NE5532DR.
How is the NE5532DR OUT1 pin connected?
The OUT1 pin has a series capacitor on 5 of 9 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the NE5532DR.
Which microcontrollers do boards using the NE5532DR use?
Most are built on RP2040/RP2350 (2), STM32 (2), ESP32 (1) and FPGA (1).
How big is a typical board using the NE5532DR?
The median is 100 × 79.7 mm, and 36% are two-layer designs.
What is the most popular open source board using the NE5532DR?
By GitHub stars, AWG DHO8-900 by MatthiasElectronic, with 215 stars.
Can I simulate one of these boards using the NE5532DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.