4 open source boards using the NEO-M8P

Real designs built with the NEO-M8P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filtersOpen license only|Most starred Recently updated Most components

The NEO-M8P in open source designs

The gallery holds 4 open source boards using the NEO-M8P from 4 GitHub repositories; a typical one measures about 80.7 × 55.8 mm and carries around 56 components.

50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is Raccoon by barbinbrad.

Parts used alongside the NEO-M8P

Microcontrollers on boards using the NEO-M8P

STM32 2

What boards using the NEO-M8P are built for

NEO-M8P: common questions

Where can I find a NEO-M8P reference design?

Each of the 4 boards on this page is a real design using the NEO-M8P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the NEO-M8P?

The AMS1117-3.3, AMS1117-5.0, SIP32431DR3, STM32F413RGT6 and TJA1042T-3 appear in the most repositories here.

Which microcontrollers do boards using the NEO-M8P use?

Most are built on STM32 (2).

How big is a typical board using the NEO-M8P?

The median is 80.7 × 55.8 mm, and 50% are two-layer designs.

What is the most popular open source board using the NEO-M8P?

By GitHub stars, Raccoon by barbinbrad, with 16 stars.

Can I simulate one of these boards using the NEO-M8P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.