4 open source boards using the NEO-M8P
Real designs built with the NEO-M8P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Raccoon
barbinbrad
100.9 × 71.5 mm56 parts4LMIT16
STM32Raccoon
sunnyhaibin
100.9 × 71.5 mm56 parts4LMIT9
GPS02
mlab-modules
60.5 × 40.1 mm60 parts2LGPL-3.07
Neo m8p board
dizcza
33.9 × 32.5 mm12 parts2LNo license3
The NEO-M8P in open source designs
The gallery holds 4 open source boards using the NEO-M8P from 4 GitHub repositories; a typical one measures about 80.7 × 55.8 mm and carries around 56 components.
50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Raccoon by barbinbrad.
Parts used alongside the NEO-M8P
Microcontrollers on boards using the NEO-M8P
What boards using the NEO-M8P are built for
NEO-M8P: common questions
Where can I find a NEO-M8P reference design?
Each of the 4 boards on this page is a real design using the NEO-M8P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the NEO-M8P?
The AMS1117-3.3, AMS1117-5.0, SIP32431DR3, STM32F413RGT6 and TJA1042T-3 appear in the most repositories here.
Which microcontrollers do boards using the NEO-M8P use?
Most are built on STM32 (2).
How big is a typical board using the NEO-M8P?
The median is 80.7 × 55.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the NEO-M8P?
By GitHub stars, Raccoon by barbinbrad, with 16 stars.
Can I simulate one of these boards using the NEO-M8P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.