2 open source boards using the PE43711
Real designs built with the PE43711, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
4ch-RF-FE
JohnnyGOX17
249.9 × 94.7 mm275 parts4LMIT5
Gain Block Dev Rev 0
joshajohnson
48 × 48 mm41 parts4LGPL-3.025
The PE43711 in open source designs
The gallery holds 2 open source boards using the PE43711 from 2 GitHub repositories; a typical one measures about 149 × 71.4 mm and carries around 158 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Gain Block Dev Rev 0 by joshajohnson.
What boards using the PE43711 are built for
PE43711: common questions
Where can I find a PE43711 reference design?
Each of the 2 boards on this page is a real design using the PE43711. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the PE43711?
The median is 149 × 71.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the PE43711?
By GitHub stars, Gain Block Dev Rev 0 by joshajohnson, with 25 stars.
Can I simulate one of these boards using the PE43711 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.