9 open source boards using the RTL8019AS

Real designs built with the RTL8019AS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

The RTL8019AS in open source designs

The gallery holds 9 open source boards using the RTL8019AS from 8 GitHub repositories; a typical one measures about 153.1 × 74.9 mm and carries around 44 components.

50% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is Isa8 eth by skiselev.

Parts used alongside the RTL8019AS

Microcontrollers on boards using the RTL8019AS

What boards using the RTL8019AS are built for

RTL8019AS: common questions

Where can I find a RTL8019AS reference design?

Each of the 9 boards on this page is a real design using the RTL8019AS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the RTL8019AS use?

Most are built on AVR/Arduino (1).

How big is a typical board using the RTL8019AS?

The median is 153.1 × 74.9 mm, and 50% are two-layer designs.

What is the most popular open source board using the RTL8019AS?

By GitHub stars, Isa8 eth by skiselev, with 150 stars.

Can I simulate one of these boards using the RTL8019AS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part