15 open source boards using the RTL8019AS
Real designs built with the RTL8019AS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Isa8 eth
skiselev
104.1 × 74.9 mm30 partsNo license150ISA8019
Manawyrm
157.4 × 74.2 mm52 parts2LGPL-3.0129ISA 8bitNetwork 8019
hkzlab
104.1 × 71.9 mm55 parts2LCC-BY-NC-4.039MAXI030
aslak3
239.4 × 165.7 mm197 parts4LGPL-2.038AVR/Arduino
Playground 68030 Mk I
thorpej
259.9 × 154.9 mm227 parts6LNo license15Tandy-XT-CF-Lite-LAN
retrotheory
85.7 × 132.2 mm44 partsGPL-3.08Cheapsk8 lan
zombienerd
153.1 × 66.5 mm21 parts2LNo license3Isa8 eth main
theos10
104.2 × 58.7 mm25 parts2LCERN-OHL-S-2.02EC1834-LAN
mgoegel
114.4 × 74.9 mm30 partsNo license1ISA8019
Vakon84
157.4 × 74.2 mm52 parts2LGPL-3.00Isa8 eth
Vakon84
104.1 × 74.9 mm30 partsCERN-OHL-S-2.00Cheapsk8 lan
Vakon84
153.1 × 66.5 mm21 parts2LNo license0Spreadout
aslak3
239.4 × 165.7 mm190 parts4LGPL-2.038AVR/Arduino
M68k hbc
ehbc-project
304.8 × 243.8 mm72 parts6LNo license0Eth8019
ddraig68k
100 × 62.5 mm30 parts4LMIT29
How designs wire the RTL8019AS
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the RTL8019AS connects to, and the resistors, capacitors and other passives placed on it.
- The X1 pin has a series resistor on 12 of 14 designs, most often 1 MΩ (then 10 MΩ).
- The X1 pin has a crystal on 12 of 14 designs, most often 20 MHz.
- The X2 pin has a crystal on 12 of 14 designs, most often 20 MHz.
- The TPIN- pin has a series resistor on 12 of 14 designs, most often 200 Ω (then 49.9 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 6 | Connected to: VCC 100% |
|
| GNDpin 14, 28, 44, 52, 83, 86 | Connected to: GND 100% | — |
| VCCpin 17, 47, 57, 70, 89 | Connected to: VCC 100% |
|
| TX-pin 48 | Connected to: Not connected 100% | — |
| TX+pin 49 | Connected to: Not connected 100% | — |
| X1pin 50 | Connected to: Signal 93% |
|
| X2pin 51 | Connected to: Signal 86% |
|
| CD-pin 53 | Connected to: Not connected 93% | — |
| CD+pin 54 | Connected to: Not connected 93% | — |
| RX-pin 55 | Connected to: Not connected 93% | — |
| RX+pin 56 | Connected to: Not connected 93% | — |
| TPIN-pin 58 | Connected to: A connector 71% |
|
| TPIN+pin 59 | Connected to: A connector 71% |
|
| LEDBNCpin 60 | Connected to: Not connected 93% | — |
| LED0pin 61 | Connected to: A connector 50% |
|
| LED1pin 62 | Connected to: A connector 50% |
|
| LED2pin 63 | Connected to: Not connected 86% | — |
| AUIpin 64 | Connected to: Signal 71% · GND 29% |
|
| JPpin 65 | Connected to: Signal 57% · not connected 21% · 5V 21% |
|
| BA21/PNPpin 66 | Connected to: Not connected 50% · a signal 50% |
|
| BA20/BS0pin 67 | Connected to: Not connected 57% · a signal 43% |
|
| BA19/BS1pin 68 | Connected to: Not connected 57% · a signal 43% |
|
| BA18/BS2pin 69 | Connected to: SST39SF040 43%, a connector 21% · not connected 43% |
|
| BA17/BS3pin 71 | Connected to: SST39SF040 43%, a connector 21% · not connected 43% |
|
| BA16/BS4pin 72 | Connected to: SST39SF040 43%, a connector 21% · not connected 43% |
|
| BD6/IRQS0/EEDIpin 78 | Connected to: SST39SF040 43%, 93LC46C 29%, a connector 21% |
|
| BD5/IRQS1/EESKpin 79 | Connected to: SST39SF040 43%, 93LC46C 29%, a connector 21% |
|
| BD3/IOS0pin 81 | Connected to: SST39SF040 43%, a connector 21% · not connected 36% |
|
| BD2/IOS1pin 82 | Connected to: SST39SF040 43%, a connector 21% · not connected 36% |
|
| BD1/IOS2pin 84 | Connected to: SST39SF040 43%, a connector 21% · not connected 36% |
|
| BD0/IOS3pin 85 | Connected to: SST39SF040 43%, a connector 21% · not connected 36% |
|
| SD15pin 87 | Connected to: Not connected 64% · a signal 36% | — |
| SD14pin 88 | Connected to: Not connected 64% · a signal 36% | — |
| SD13pin 90 | Connected to: Not connected 64% · a signal 36% | — |
| SD12pin 91 | Connected to: Not connected 64% · a signal 36% | — |
| SD11pin 92 | Connected to: Not connected 64% · a signal 36% | — |
| SD10pin 93 | Connected to: Not connected 64% · a signal 36% | — |
| SD9pin 94 | Connected to: Not connected 64% · a signal 36% | — |
| SD8pin 95 | Connected to: Not connected 64% · a signal 36% | — |
| IOCS16B/SLOT16pin 96 | Connected to: A connector 21% |
|
51 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Isa8 eth by skiselev, ISA8019 by Manawyrm, ISA 8bitNetwork 8019 by hkzlab and MAXI030 by aslak3.
The RTL8019AS in open source designs
The gallery holds 15 open source boards using the RTL8019AS from 14 GitHub repositories; a typical one measures about 153.1 × 74.9 mm and carries around 44 components.
55% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is Isa8 eth by skiselev.
Parts used alongside the RTL8019AS
Microcontrollers on boards using the RTL8019AS
What boards using the RTL8019AS are built for
RTL8019AS: common questions
Where can I find a RTL8019AS reference design?
Each of the 15 boards on this page is a real design using the RTL8019AS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the RTL8019AS X1 pin?
The X1 pin has a series resistor on 12 of 14 designs, most often 1 MΩ (then 10 MΩ). Counted from the KiCad layouts of 14 open source designs using the RTL8019AS.
How is the RTL8019AS X2 pin connected?
The X2 pin has a crystal on 12 of 14 designs, most often 20 MHz. Counted from the KiCad layouts of 14 open source designs using the RTL8019AS.
What resistor goes on the RTL8019AS TPIN- pin?
The TPIN- pin has a series resistor on 12 of 14 designs, most often 200 Ω (then 49.9 Ω). Counted from the KiCad layouts of 14 open source designs using the RTL8019AS.
What parts are used alongside the RTL8019AS?
The SST39SF040, 93LC46C, AT93C46DN, 93LCxxC and MC68030RC appear in the most repositories here.
Which microcontrollers do boards using the RTL8019AS use?
Most are built on AVR/Arduino (2).
How big is a typical board using the RTL8019AS?
The median is 153.1 × 74.9 mm, and 55% are two-layer designs.
What is the most popular open source board using the RTL8019AS?
By GitHub stars, Isa8 eth by skiselev, with 150 stars.
Can I simulate one of these boards using the RTL8019AS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.