3 open source boards using the SHT40-AD1B-R2
Real designs built with the SHT40-AD1B-R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32AnthC
Anthilla
85 × 56 mm203 parts4LNo license39
RP2040/RP2350StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1
ESP32Cryobelt
michael201110
90 × 50 mm92 parts4LNo license1
The SHT40-AD1B-R2 in open source designs
The gallery holds 3 open source boards using the SHT40-AD1B-R2 from 3 GitHub repositories; a typical one measures about 85 × 56 mm and carries around 203 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is AnthC by Anthilla.
Microcontrollers on boards using the SHT40-AD1B-R2
What boards using the SHT40-AD1B-R2 are built for
SHT40-AD1B-R2: common questions
Where can I find a SHT40-AD1B-R2 reference design?
Each of the 3 boards on this page is a real design using the SHT40-AD1B-R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SHT40-AD1B-R2 use?
Most are built on ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the SHT40-AD1B-R2?
The median is 85 × 56 mm, and 0% are two-layer designs.
What is the most popular open source board using the SHT40-AD1B-R2?
By GitHub stars, AnthC by Anthilla, with 39 stars.
Can I simulate one of these boards using the SHT40-AD1B-R2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.