6 open source boards using the SIP32431DR3
Real designs built with the SIP32431DR3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MicroSD-Switcher-Reader
will127534
42.3 × 60.2 mm72 parts4LMIT24
Nordic nRFShio Rev A
uw-x
50.2 × 24.2 mm67 parts2LCERN-OHL-W-2.017
STM32Raccoon
barbinbrad
100.9 × 71.5 mm56 parts4LMIT16
STM32Raccoon
sunnyhaibin
100.9 × 71.5 mm56 parts4LMIT9
ESP32Corne Cherry
mornepousse
340.8 × 104.7 mm275 parts4LMIT1
ESP32Corne Cherry
169.3 × 198.4 mm275 parts4LMIT1
The SIP32431DR3 in open source designs
The gallery holds 6 open source boards using the SIP32431DR3 from 5 GitHub repositories; a typical one measures about 100.9 × 71.5 mm and carries around 70 components.
83% use four copper layers or more, and 100% carry an open source license.
The most starred is MicroSD-Switcher-Reader by will127534.
Parts used alongside the SIP32431DR3
Microcontrollers on boards using the SIP32431DR3
What boards using the SIP32431DR3 are built for
SIP32431DR3: common questions
Where can I find a SIP32431DR3 reference design?
Each of the 6 boards on this page is a real design using the SIP32431DR3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SIP32431DR3?
The AMS1117-3.3, AMS1117-5.0, NEO-M8P, STM32F413RGT6 and TJA1042T-3 appear in the most repositories here.
Which microcontrollers do boards using the SIP32431DR3 use?
Most are built on ESP32 (2), STM32 (2) and Nordic nRF (1).
How big is a typical board using the SIP32431DR3?
The median is 100.9 × 71.5 mm, and 17% are two-layer designs.
What is the most popular open source board using the SIP32431DR3?
By GitHub stars, MicroSD-Switcher-Reader by will127534, with 24 stars.
Can I simulate one of these boards using the SIP32431DR3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.