4 open source boards using the SN74ABT541
Real designs built with the SN74ABT541, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Inverter
horychen
100 × 50 mm94 parts4LGPL-3.016
Pcb5
93.9 × 51.7 mm80 parts4LGPL-3.016
Sheet1(原始)
122.2 × 82.1 mm74 parts4LGPL-3.016
Rs485 SN65HVD75 TestBoard
30 × 17.1 mm11 parts2LGPL-3.016
The SN74ABT541 in open source designs
The gallery holds 4 open source boards using the SN74ABT541 from 1 GitHub repository; a typical one measures about 97 × 50.9 mm and carries around 77 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is Inverter by horychen.
What boards using the SN74ABT541 are built for
SN74ABT541: common questions
Where can I find a SN74ABT541 reference design?
Each of the 4 boards on this page is a real design using the SN74ABT541. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the SN74ABT541?
The median is 97 × 50.9 mm, and 25% are two-layer designs.
What is the most popular open source board using the SN74ABT541?
By GitHub stars, Inverter by horychen, with 16 stars.
Can I simulate one of these boards using the SN74ABT541 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.