5 open source boards using the SN74LVC8T245
Real designs built with the SN74LVC8T245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiCM5-SODIMM-Carrier
KaiPereira
69.6 × 46.1 mm96 parts6LCERN-OHL-P-2.029
RISC-VAvaja
Haimrich
70 × 15.5 mm55 parts2LMIT11
FPGAXc17 prom prog
msinger
123 × 95 mm281 parts2LCC-BY-SA-4.03
STM32350 Flight controller
ThaoMinhHoang
98.7 × 104 mm233 parts4LNo license3
Video+Sound
aslak3
98.6 × 92.1 mm101 parts4LGPL-2.038
The SN74LVC8T245 in open source designs
The gallery holds 5 open source boards using the SN74LVC8T245 from 5 GitHub repositories; a typical one measures about 98.6 × 92.1 mm and carries around 101 components.
60% use four copper layers or more, and 80% carry an open source license.
The most starred is Video+Sound by aslak3.
Microcontrollers on boards using the SN74LVC8T245
What boards using the SN74LVC8T245 are built for
SN74LVC8T245: common questions
Where can I find a SN74LVC8T245 reference design?
Each of the 5 boards on this page is a real design using the SN74LVC8T245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC8T245 use?
Most are built on FPGA (1), Raspberry Pi (1), RISC-V (1) and STM32 (1).
How big is a typical board using the SN74LVC8T245?
The median is 98.6 × 92.1 mm, and 40% are two-layer designs.
What is the most popular open source board using the SN74LVC8T245?
By GitHub stars, Video+Sound by aslak3, with 38 stars.
Can I simulate one of these boards using the SN74LVC8T245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.